Abrasive Wheels Toolbox Talk

Here’s a free toolbox talk for abrasive wheels. View and download more of our toolbox talks online with our kit that contains more than 60 common toolbox talks.

Free Abrasive Wheels Toolbox Talk Online

Introduction

Misuse of abrasive wheels continues to result in accidents, often because the wrong type of wheel is fitted.

Main points

Wheels must only ever be fitted/replaced by a competent person.
Machine speeds must never exceed the maximum permissible speed of the wheel.
Eye and ear protection should always be worn.

Discussion points

Don’t exert heavy pressure on wheels.
Don’t use the sides of wheels.
Keep fingers clear of cutting edge of wheel.
Ensure any guards are always correctly fitted and used – the minimum wheel surface required for the task should be exposed.
Be aware of other workers in the area – do not expose them to risk.
Adjust tool rests to be as close as possible to the face of the wheel.
Only reinforced discs should be used on handheld machines.
Run replacement wheels for a full minute before using them ensuring you stand well clear.
Always stop wheels when not in use.
Keep the face of the wheel evenly dressed.
Visually check wheels before use for any obvious faults – if in any doubt get verification.
The speed of the machine must not exceed the maximum permissible speed of the wheel. Over-speeding causes 33% of accidents.
Ear and eye protection must always be worn.

PPE IS NO SUBSTITUTE FOR A SAFE SYSTEM OF WORK

Name: Company: Signature
1.

Person carrying out TBT:

…………
Date:

……………

If you want to save time on your health and safety obligations, create RAMS, risk assessments, and method statements online in just minutes with our online health and safety software. Enjoy a free 15-day trial and get access now for free!